piStorm – getting started with Emu68

In this guide, which will be my shortest ever, I explain how to get started with the Emu68 barebone JIT emulator for the piStorm.


Emu68 for piStorm Nightly build

The shortest instructions ever 🙂

Download the latest nightly build of early alpha Emu68 for piStorm from the resource above. You should be looking for a file named “Emu68-pistorm-20211106-9c3186.zip” or similar (note that the files are sorted in forward alphabetically order, and the latest are a bit down on the list).

Extract the files to the root of a fat32-formatted SD-card.

Copy your Amiga kickstart file to the root of that card.

Edit the configuration file (config.txt) and set the kickstart file name (last line in the included config file):

# PiStorm variant - use initramfs to map selected rom
initramfs kick.rom

Insert the SD-card in your pi3a+ mounted to the piStorm. Power on the Amiga and enjoy the extremely short startup time 🙂

The setup is now ready for boot from floppy (although many games does not work yet, at least not booting from floppy, but Workbench floppies do, as the Install3.2 disk to install AmigaOS onto a hard drive).

Installing AmigaOS on a hard drive (partition on SD-card)

For hard drive setup, there will be more steps involved, such as partitioning the sd-card into at least one boot partition and one or more Amiga partitions.

piStorm – Preparing the SD-card for Emu68